Client Profile: 

Our client, a reputed Engineering and Construction Company in the Middle East has an upcoming oil and gas project in Algeria. They are presently in need of design and engineering personnel as per following details. 
During the detailed engineering phase the Employee will be based at Project Home Office in the Middle East. Subsequently, some employee will have to move to Algeria for Field Engineering service, if required, when he will be provided single accommodation, food and local transport by the company.

Job Duration: 12-15 months
 

1. Senior Design Engineer - Process (Material & Corrosion)

Qualification: B.E. / B.Tech in Metallurgy / Chemical / Mechanical engineering with sound knowledge in ECE / PREDICT etc. softwares.

Experience: 5 years and above, out of which minimum 3 years of experience shall be in Design and detailing Engineering of Oil & Gas / Refinery / Petrochemical plants. The role is to perform Basic & Detailed engineering activities and develop / review of relevant material & corrosion engineering deliverables

Key responsibilities and Accountabilities: 

  • Prepare / Endorse FEED documents 
  • Check & review Material Selection Philosophy
  • Check & review Corrosion Control Philosophy
  • Simulations for corrosion rate calculations 
  • Check & review Material Selection Diagrams
  • Check & review CC & CP requirements
  • Interact with vendors during offer evaluation
  • Vendor drawing reviews
  • Participate in HAZOP/Design Reviews and close outs
  • Support during field engineering

Job-specific skills required:
  • Preparation & review of FEED documents 
  • Checking & review Detailed Engineering deliverables
  • Material selection and Corrosion rate calculations.
  • Should be conversant with: API / NACE / NFPA / Shell DEP / ASTM / ASME / ISO / NEMA etc

Salary Range: AED 12500 - 14500 pm (gross)

2. Design Engineer Process (Nos. 4) 

Qualification: B.E. / B. Tech in Chemical Engineering, shall have Basic knowledge in HYSYS / PIPESIM and be well versed with MS Office. 

Experience: 3 years and above, out of which minimum 2 years of experience shall be in Process Design & Detailed Engineering of Oil & Gas / Refinery / Petrochemical plants/ Pipelines. The role is to perform detailed engineering activities and preparation of relevant process engineering deliverables. 

Key responsibilities and Accountabilities: 
  • Prepare and develop process deliverables such as PFDs, P&IDs, Process Data Sheets, Process Design Criteria, Design of relief and venting systems etc.
  • Prepare Sizing Calculations such as Equipment Sizing, vessel sizing, Safety & relief valve sizing, Control Valve Sizing, Pump Hydraulic Calculations, Line Sizing
  • Be familiar with Process simulation using HYSYS and Hydraulic analysis. 
  • Prepare datasheet for Equipments and Instruments.
  • Prepare Utility Summary, Chemical Summary, Line List, Tie-in List and Equipment List
  • Provide the process data for all type of process instruments like pressure, flow, temperature instruments etc.
  • Provide process data to piping for valves, heat tracing, other special items datasheet 
  • Review the vendor documents and ensure that vendor document is in-line with contractual requirement and company specification 
  • Prepare documents and reports such as Process Description, Heat & Mass Balance, Process Design basis, Line list, Tie-in list, Equipment list, Utility summary, Operating & Control philosophy, Start-up & Shutdown Philosophy, Safeguarding Philosophy, Cause & Effect Diagram, and Relief & Blow down Philosophy etc.
Job-specific skills required:
  • Engineering, Procurement and Commission 
  • Preparation of FEED documents 
  • Preparation of Detailed Engineering deliverables
  • Equipment design and process engineering calculations.
  • Should be conversant with: API / NACE / Shell DEP 
Salary Range: AED 8500 - 10500 pm (gross)

3. Senior Design Engineer Loss Prevention


Qualification: B.E. / B. Tech in Fire Protection, Safety engineering Chemical or Mechanical Engineering, or in similar Engineering field (Master Degree is Preferred)

Experience: 5 years and above, out of which minimum 3 years of experience shall be in Design & Detailed Engineering of Oil & Gas / Refinery / Petrochemical plants. The role is to carry out detailed engineering activities and preparation of relevant Loss Prevention engineering. 

Key responsibilities and Accountabilities: 
  • Prepare and develop Loss Prevention deliverables such as PFD's, P&IDs, Process Data Sheets, Fire Fighting and safety Equipment Datasheets, Specification, Philosophys, Hydrant & Monitor location layout, Fire Fighting and Safety Equipment Layout, Escape Route and Safety Signs Layout, Passive Fire Protection Layout, Fire Water Line List, Fire & Gas Cause & Effect Matrix, Passive Fire Protection Schedule and Hazardous Area Classification Schedule etc.
  • Prepare firewater demand and hydraulic calculation reports using PIPENET or equivalent software.
  • Prepare and provide inputs to P&ID markups for Firewater ring main system and Deluge system including providing details of interconnection with hose reels, monitors, hydrants, Sprinkler System and deluge valves / nozzles.
  • Prepare Fire fighting, safety equipment, clean agent system and emergency response vehicle material requisitions, TQ/ clarification and TBE.
  • Review vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary.
  • Check final vendor and subcontractor data manuals to ensure that all requested data has been received and approved.
  • Prepare safety study scope of work, TQ/clarification, TBE and methodology. 
  • Participate safety workshops (such as HAZID/HAZOP/SIL) and provide inputs to safety study consultants.
  • Coordinate safety study close outs and prepare safety study close out reports.
  • Review third party safety study reports that are in compliance with project specifications.
  • Prepare / Maintain safety study HSE Action Tracking Register
  • Participation in Plot Plan Review and 3D Model Review Workshop to ensure that firefighting and safety equipment locations meet the project requirement.
  • Perform conceptual, FEED, safety Studies, and detailed analyses and design as per design basis, project specifications, design codes and standards.
  • Clearly communicate and explain complex issues and work to establish understanding.
  • Perform design verification through single-discipline check / inter-discipline check (IDC).
  • Provide inputs to other discipline, vendor and safety studies consultants as required.
  • Provide technical direction and review of Designers producing drawings/documents related to Fire Protection & Safety Engineering.
  • Raise technical queries to obtain missing information, clarify work scope, and to maintain preferred Company/project procedures, specifications, standards, practices and operational requirements.
  • Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates. Provide similar support for Variation Orders
  • Participate in internal, Customer and third party technical audits on engineering deliverables and vendor documents.
  • Be familiar with International Standards NFPA, Shell DEP, IP, API,BS And UL/FM for Fire Protection/Detection System and Sonatrach Algeria company Standards & Specification.
Job-specific skills required:
  • Preparation of Detailed Engineering deliverables
  • Should be conversant with International Standards NFPA, Shell DEP, IP, API, BS and UL/FM etc.
  • Preparation of FEED documents 
Salary Range: AED 12500 - 14500 pm (gross)

4. Sr. Design Engineer - Piping (Nos. 3) 

Qualification: B.E. / B. Tech / M.E. / M. Tech - Mechanical / Production. AUTOCAD, MICROSTATION, CAESAR-II, PDS/PDMS/SP3D will be added advantage. 

Experience: 5 years and above, out of which minimum 3 years of experience shall be in Design & Detailed Engineering of Oil & Gas / Refinery / Petrochemical plants. The role is to perform detailed engineering activities. 

Key responsibilities and Accountabilities:
  • Preparation of Technical Specifications, Design calculations
  • Stress Analysis 
  • Support Engineering 
  • Datasheets preparation for valves and Specialities
  • MTO preparation
  • Checking of Drawings.
Job-specific skills required:
  • Preparation of Technical Specifications and Design calculations
  • Power Plants / Oil & Gas / Petrochemical & Refinery / PIPE LINE
  • Plot plan, Equipment layouts, Piping layouts
  • Detailed engineering drawings
  • Design Calculations, Stress Analysis
  • Technical Specifications, MR, TBA, PORN, Erection Tender
  • Review of Vendor / Other discipline Drawings
  • MTO & Datasheets
  • Piping Material Specification
  • 3D Model review

Salary Range: AED 10500 - 12500 pm (gross)

5. Designer Piping (Nos. 2) 

Qualification: Diploma / ITI in Mechanical with AUTOCAD, MICROSTATION and PDS/PDMS/SP3D.

Experience: 10 years and above and mostly in Drafting & Detailed Engineering of Oil & Gas / Refinery / Petrochemical plants. The role is to develop piping and equipment layout and also check drawings and documents. 

Key responsibilities and Accountabilities:
  • Should be able to develop Plot Plan, Equipment Layout and Piping Layouts. 
  • Should give instructions to Draftspersons and check drawings prepared by them. 
  • Knowledge of Codes and Standards essential
Job-specific skills required in: 
  • Scheduling, Man hour control, Quality, Problem Solving, Drafting in CAD. Knowledge of Codes and Standards essential.
  • Power Plants / Oil & Gas / Petrochemical & Refinery / PIPE LINE
  • Plot plan, Equipment layouts, Piping layouts
  • Detailed Engineering Drawings
  • Isometrics drawings, Nozzle Orientation & Vessel Clip Drawings
  • Civil Information Drawings
  • Support drawings & support schedule
  • 3D Model Reviews (30%, 60% & 90%)
  • Vendor drawing review & other discipline drawings review
  • AutoCAD, Micro-station
  • PDS / PDMS / SP3D (ANY ONE)
Salary Range: AED 8500 - 10500 pm (gross)

Terms and Conditions: 

Status of Employment: Single 

Accommodation, Food and Transportation will require to be organised by the employee at his own cost while at Project Home Office in the Middle East. 

There is no overtime provision. 

Probation Period: 90 days

Medical Insurance: Provided by Company

Annual Leave: 30 days

Air Ticket for Annual Leave: One Economy Class Air Ticket per year up to the nearest international airport of the employee hometown.
Prospective candidates meeting the above requirements and interested in this opening and readily available for early joining, may please send their application with updated CV and all relevant supporting documents viz. scanned copy of degree/diploma, testimonials / service certificates and current salary slip to justify their claims for suitability for this position, to smitap@tyson-enterprises.com and tysonteam@gmail.com 

Post a Comment

 
Top