Image result for Djibouti poster

    FREE RECRUITMENT

    Position: Shift Engineer

    3+ years experience
    1 Maintenance and Operation of the Roughing mill with 12 continuous stand.
    2 Knowledge of Straight mill with capacity of 25 MT per hour.
    3 Able to set, repair, maintain  the guide boxes and chutes. 
    4 Able to set the mill at appropriate speed to maintain correct physical properties of the TMT bar.
    5 Control the entire workforce in the capacity of team lead.
    6 Maintain the miss rolls under 1% and achieve the targets with yield of 97%.
    7 Maintain very high level of housekeeping and safety standards within and outside the plant.
    8 Liasoning with Procurement and stores to maintain correct inventory of spares and consumables.
    9 Maintain proper maintenance check list for the entire machine including cranes.
    10 Ensure PPE compliance at 100% rate in the shift.
    11 Record and report shift performance for the entire plant.
    12 Maintain the quality parameters with in the standards.
    13 Timely communicate and maintain spares for the machines
      Working hours 10 hours including 2 hours OT (Salaries are for 10 hours)

      Air ticket and paid leave every 2 years 

      Medical Insurance as per Djibouti Law

      Accommodation On sharing basis provided by company

      Food Provided during working days

      Salary :- 1000 to 1200 USD
        Position: Furnace Operators

        8+ years experience

        1 Able to understand and maintain the furnace operation/ parameters as per requirement.
        2 Able to set temperatures and maintain the temperature with in the range.
        3 Able to understand the maintainance of furnace burners.
        4 Able to understand the maintenace of heating and pumping units, recuperators.
        5 Timely maintenance of inside furnace and maintain the healthyness of the furnace refractories and bricks.
        6 Timely communicate the procurement for furnace spares and maintain the same.
        7 Maintain oil levels /stocks and also oil consumptions.
        8 Maintain high level of house keeping and safety standards
        9 Able to take overall operations right from charging, furnace and ejector operation
          Working hours 10 hours including 2 hours OT (Salaries are for 10 hours)

          Air ticket and paid leave every 2 years 

          Medical Insurance as per Djibouti Law

          Accommodation On sharing basis provided by company

          Food Provided during working days

          Salary :- 600 to 700 USD
            Position: Sr. Mill Fitter & Asst. Mill Fitter

            1 Should have hands on experience in operating TMT rolling mills and will be able to set and run mill at rated speeds
            2 Able to set , repair and maintain the guide boxes and chutes.
            3 Should have experience in making guide settings.
            4 Should have experience in shear blade settings
            5 Through knowledge in operating right from pusher to cooling bed operations.
            6 Should have knowledge in maintaining quality parameters of the TMT bars.
            7 Hands on experience in gas cutting as well as welding.
            8 Should have worked at least 5- 7 years in TMT rolling mills.
            9 Maintain the miss rolls with in 1 %
            10 Timely communicate and maintain spares for the machines.
            11 Maintain high level of house keeping and safety standards
              Working hours 10 hours including 2 hours OT (Salaries are for 10 hours)

              Air ticket and paid leave every 2 years 

              Medical Insurance as per Djibouti Law

              Accommodation On sharing basis provided by company

              Food Provided during working days

              Salary :- 600 to 700 USD

                Position: Mechanical Mill Fitter

                1 Should have experience in fabricating repertory tables
                2 Hands on experience in gas cutting as well as welding .
                3 Hands on experience in fabrication jobs.
                4 Should have knwoledge on Preventive and break down maintenance
                5 Should have experience in filling machine check list 
                6 Should have hands on experience in maintaining Hydraulic pumps and valves.
                7 Should have hands on experience in compressor , water pumps servicing and repair.
                8 Should have worked at least 5- 7 years in TMT rolling mills.
                9 Timely communicate and maintain spares for the machines.
                10 Maintain high level of house keeping and safety standards
                  Working hours 10 hours including 2 hours OT (Salaries are for 10 hours)

                  Air ticket and paid leave every 2 years 

                  Medical Insurance as per Djibouti Law

                  Accommodation On sharing basis provided by company

                  Food Provided during working days

                  Salary :- 600 to 700 USD
                    Position: Workshop Machinist

                    1 Should have worked in TMT machine shop for 5-7 years
                    2 Should have hands on experinece in reading drawings and making jobs as per drawing.
                    3 should have experience in operating all work shop machines like lathes,grinding machine, shapers,drilling machines
                    4 Should have knowledge on assembling mill rolls.
                    5 Shold have experience in maching roughing , finishing rolls.
                    6 Should have knowledge in TMT rolling mill operations.
                    7 Should have experinece in maintaining work shop machines, repairing.
                    8 Maintain high level of house keeping and safety standards
                    9 Timely communicate and maintain spares for the machines
                      Working hours 10 hours including 2 hours OT (Salaries are for 10 hours)

                      Air ticket and paid leave every 2 years 

                      Medical Insurance as per Djibouti Law

                      Accommodation On sharing basis provided by company

                      Food Provided during working days

                      Salary :- 550 to 650 USD
                        Position: Roll Choke Assembly Operators

                        1 Should have worked in TMT machine /Roll assembly shop for 5-7 years
                        2 Should have hands on experinece in reading drawings and making jobs as per drawing.
                        3 Able to assemble all kinds of mills rolls with proper dimenetional values.
                        4 Should have knowledge in TMT rolling mill operations.
                        5 Should have experience in lathe machines.
                        6 Able to set and repair the roll chokes and bearings.
                        7 Timely communicate and maintain spares for rolls .
                        8 Hands on experience in gas cutting as well as welding.
                        9 Maintain high level of house keeping and safety standards
                          Working hours 10 hours including 2 hours OT (Salaries are for 10 hours)

                          Air ticket and paid leave every 2 years 

                          Medical Insurance as per Djibouti Law

                          Accommodation On sharing basis provided by company

                          Food Provided during working days

                          Salary :- 600 $ USD

                          Email Address:recruitment.goodmans@gmail.com
                          Telephone:91-9820020511

Post a Comment

 
Top