Image result for Conserve Green Building and MEP Solutions LLP"

Conserve Engineering Solutions comprises of a group of young and aspiring engineers with good in-depth knowledge in Building Construction and in specialist Engineering & Technology Services focused on enhancing our client's project engineering efficiency. Established in 2016 in Qatar, to serve the Construction Sector with Engineering Design Support Services to companies in Asia, Middle East, Europe, Australia, Canada, US and other parts of the world, we are an exponentially growing engineering company with 230 People across the globe. Through our commitment to quality, constant innovation and respect for the planet, we assure to exceed expectations by providing the best of the possible solutions to constantly meet the client's requirements with steady improvement. Conserve provide optimum engineering solutions in the following sectors
* Buildings
* Infrastructure
* Oil & Gas
* Power & Energy
Our Solutions
* Building Information Modeling (BIM)
* 3D Laser Scanning & Survey
* Simulation & Analysis
* Engineering Services (Oil & Gas)
* Engineering Design Support Services (Building & Infrastructure)
* Green Building Services


Electrical Draughtsman

  • Preparation of Electrical services (eg. ELV, LV, Lighting) shop/detail drawings and as built drawings.
  • Ensures and maintains quality for finished drawings.
  • Preparation of single line diagram and equipment layouts.
  • Preparation of layout according to the local and international Standards.
  • Preparation of Cable Schedule and Cable tray sizing.
  • Developing the Technical room layout and sectional detail
  • Maintains and updates electronic and manual records of the company.
Technical Skills:
  • Education: Diploma / Bachelor in Electrical Engineering
  • At least 3+ years of experience as an Electrical Draughtsman,
  • Must Have Gulf Project experience.
  • Expert knowledge of Electrical System
  • Advanced knowledge of MS Office and PDF Tools
Additional Skills (Skills / Abilities) :
  • Must have basic knowledge in Mechanical, Architecture, Structural and related field.
  • Applies Courage at work
  • Completes a quality job - right first time

Autoplant 3D Modeler / Admin

  • Equipment modelling and layout for process plants, yard pipe racks, tank frames and utilities.
  • Piping system modelling and layout generation for offshore and onshore of oil and gas, petro chemical plants and refinery plants.
  • Steel structural modelling and general arrangements of equipment, piping and ducting support structure.
  • HAVC duct roughing 3Dmodel and general arrangement drawings produce.
  • Clash deduction and feasibility analysis of piping, structural, equipment and ducting.
  • Holes and penetration management of piping and ducting of oil and gas projects.
  • General arrangement draft extractions of piping layout and key plan creation by using auto plant software.
  • Participation and handing model reviews & video conferences with the client / inter disciplines.
  • Make piping support, piping supports-drawing preparation for nonstandard supports.
  • Preparing Isometrics and general arrangement of piping.
  • Review the piping design documents (P&ID, Isometrics, GA's, supports details, orientation drawings and vendor drawings).
  • Continuously updated project drawings and documents to final as built status.
  • Exposure in 3D model reviews, design reviews, clash checks using Navis works.
  • Develop the piping layout as per standards, required detailed engineering to be done.
  • Auto plant 3D problem solving, standardize ISO output & every 3D output.
  • Field dimensioning, preparation of site sketch preparation as built drawings.
  • Inter discipline / squad check of other department drawings.
  • Preparation of detail drawings extraction of equipment and steel structural arrangements.
  • MTO-Material Take Off extraction of piping layout equipment, and steel structural.
  • BOM-Bill of material extraction of entire piping systems and steel structural.
  • Preparation/checking of nozzle orientation drawings.
Essential of Administrator:
  • 3D administrator part very conversant with Auto plant 3D software.
  • Customize and update the primitives, standard items and vendor equipment based on the vendor catalogues.
  • Specification development of Piping, equipment and other items like HVAC, Electricals in the auto plant 3D.
  • MDS-multi discipline supports upload into the auto plant 3D.
  • Rectify the problems in the auto plant 3D software while doing the projects.
  • Attend the meetings and video conference for clarification with the client regarding project related quires and implementing the customized client's desired items in the auto plant 3D.
Software Skills:
  • Bently Auto plant v 8.1
  • Bently Open Plant

Job location:  Qatar.

Email: careers@conserveint.com & balamurugan@conservesolution.com

kindly update your current CTC and expected CTC in your application


Bala Murugan
+97466822611
balamurugan@conservesolution.com,careers@conserveint.com

Post a comment

 
Top