It is engaged in the manufacture of Pressure Vessels, Columns, Reactors, Boilers, De aerators, Dryers, Silos, Storage Tanks, Site erected tanks, Structural & Piping for Oil & Gas Sectors, Chemical & Petrochemical plants , De-Salination & Power plants in Kingdom and outside Kingdom projects

QA/QC Engineer

Minimum Diploma or Bachelor Degree in Mechanical Engineering with 6 years experience. Shall have additional Certification in AWS CWI or CSWIP, BGAS or NACE, NDT (Level II in RT, UT, PT, MT & RTFI) and Internal Auditor certificate in ISO 9001 : 2008 or 2015 or Lead Auditor.

Candidates should have experience in Piping, Pressure vessels, Heat exchangers and Boilers fabrication shop or Shutdown as a QA/QC engineer.
Capable of handling third party inspection agencies like Lloyds, BV, ABS etc.
Shall be conversant with international codes such as ASME, ASTM, TEMA, API, DIN, JIS, ANSI, BS-5500 etc.
Shall have knowledge in Heat Treatment, NDT, Hydrotest, Pneumatic test, surface preparation, Painting / Coating and Galvanizing.
Shall be thorough in QA/QC documentation, welding procedure/ welder qualification.
Shall have hands on quality experience in Mechanical Construction Company.
Shall have exposure to ISO-9001 : 2008 or 2015 Quality Management system a internal quality audit / External Audit and ASME U,U2,S & R Stamp certification Audit..
Previous Saudi Aramco or Sabic Experience is Preferable and shall be familiar with their specification / standards.
Shall able to coordinate with client representative and Handle the QC / NDT Inspectors under his supervision


QC Inspector (PAINTING/WELDING)


Minimum 5 years for Graduate Engineers or 6 to 8 years for Diploma Engineers. Shall have additional Certification in AWS CWI or CSWIP, BGAS or NACE, NDT (Level II in RT,UT,PT,MT & RTFI) and Internal Auditor certificate in ISO 9001 : 2015.
Candidates should have experience in Piping, Pressure vessels, Heat exchangers and Boilers fabrication shop or Shutdown as a QC INSPECTOR (PAINTING/WELDING)
Capable of handling third party inspection agencies like Lloyds, BV, ABS etc.
Shall be conversant with international codes such as ASME, ASTM, TEMA, API, DIN, JIS, ANSI, BS-5500 etc.
Shall have knowledge in Heat Treatment, NDT, Hydrotest, Pneumatic test, surface preparation, Painting / Coating and Galvanizing.
Shall prepare QA/QC documentation, welding procedure/ welder qualification.
Shall have hands on quality experience in Mechanical Construction Company.
Shall have exposure to ISO-9001 : 2015 Quality Management system a internal quality audit and ASME U,U2,S & R Stamp certification Audit.
Previous Saudi Aramco or Sabic project Experience is Preferable and shall be familiar with their specification / standards.
Shall able to coordinate with client representative and able to Handle all the testing requirement of Coating.


QC WELDING INSPECTOR


Graduate/Diploma in Mechanical Engineering and certified welding inspector (AWS-CWI/CSWIP3.1) with a minimum of 5 years experience.
Weld visual inspection of weld seams of Pressure Vessels / Columns / Heat Exchanger, etc.
Identify traceability of welders as per welding map.
Prepare Weld Visual Examination Reports for review / acceptance by clients / AI.
Conducting Welder Qualification tests and witnessing.
Verification of Continuity of welders for various processes.
Visual inspection of welded components and assemblies before NDT.
Final Visual inspection of completed equipment.
Welding surveillance during fabrication.
Preparing Welder traceability reports

NDT TECHNICIAN


Graduate in Science or Diploma in Mechanical Engineering with a minimum of 5 years’ Experience.
Qualified Level-II in RT/UT/PT/MT/RTFI examinations
Knowledge of RT/UT methods
Receive PT/MT requests from production and coordinate for conduction the PT/MT.
Receive RT/UT requests from production and coordinate with RT/UT Sub contractors for carrying out RT /UT.
Coordinate with production for facilitating scaffolding for carrying out NDT
Preparing PT/MT reports after completion of PT/MT
Coordinate with production and conduct hardness tests, PMI, PT, MT, UT etc.
Coordinate with clients for witness of MT/PMI/UT and prepare reports.
Notify clients for review of radiography films and sign off RT reports.
Budget Control


CNC Machine Operator 


(CNC drill & gantry type cutting m/c)
Diploma in CNC Machine Operator/ Vocational Training /Technical School certification
Must have minimum 4 years experience on CNC Machine Operations Like (CNC Drill, CNC mill, CNC cutting etc) in heavy industrial manufacturing / fabrication company
Should have experience in CNC online / offline programming, Ability to perform tasks in a safe and responsible manner. Should be good in reading and speaking English, Familiar with all type of machining, cutting


HYDRO TEST TECHNICIAN


High School Certificate/ or ITI Fitter Certificate
Minimum 4 years’ experience as Hydro test technician/ fitter in field of pressure Vessels, Heat Exchangers, Piping etc. in Oil and Gas, or Petrochemical
Able to read Procedure, drawing, vessels /heat exchanger fabrication, Familiar with hydro test, filling, pressurization, venting, drain etc. should be good in reading and speaking English.


PRODUCTION SUPERVISOR (Fabrication/ Welding/ Blasting & Painting)

Diploma or Engineering graduate.
Must have minimum 4 - 5 years experience as Supervisor in fabrication industries like vessels and tanks, Structural, Piping. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Know how to control of manpower, should have welding & fabrication knowledge


ROLLING MACHINE OPERATOR


Diploma in CNC Machine Operator/ Vocational Training /Technical School certification
Must have minimum 4 years’ experience on Rolling Machine Operations in heavy industrial manufacturing / fabrication company. Should be worked in both cases of machine 3 roller/ 4 roller type.
Should have experience in CNC online / offline programming, Four Roller with NC/manual controller; Ability to performs tasks in a safe and responsible manner. Should be good in reading and speaking English, Familiar with Cylindrical, Conical shapes rolling operation.


Estimation & Proposal Engineer


A degree/diploma holder or Bachelor of Science in Mechanical Engineering.
Experienced in Preliminary mechanical design (Bidding) and estimation for at least eight (8) years in manufacturing sector.Basic Knowledgeable in design and drawing softwares such as PvElite, AME tank, HTRI, Auto Cad. Familiar with Estimation / Proposal / Fabrication of equipment such as Pressure Vessel, Heat Exchanger, Fire Heater Columns, Tanks, Skids, Pipe spools etc.. Previous Saudi Aramco or Sabic project Experience is Preferable and shall be familiar with their specification / standards. ASME, API, AWS, TEMA, standards
Shall have exposure to ISO-9001 : 2015 Quality Management system and ASME U,U2,S & R Stamp certification.


DESIGN ENGINEER


A degree in Mechanical Engineering or Diploma in Mechanical Engineering with experienced in mechanical design for at least Six (6) years in manufacturing sector.
Sound Knowledgeable in various designs and drawing softwares such as PvElite, AME tank, HTRI, Auto Cad.
Should have hands on experience in the design of process equipment’s like pressure vessels, heat exchangers etc., as per international codes like ASME, API, TEMA, BS etc.
responsible and Preparation / Review of mechanical design (either Manual or Software) package, detail engineering and drawings of equipment such as Pressure Vessel, Heat Exchanger, Fire Heater Columns, Tanks, Skids, Pipe Spooling (weld mapping), Structural, Stress Analysis, Heat Analysis and other Mechanical Construction as per the applicable international engineering codes and client’s specifications.
Review and checking of drawings and bill of materials.
To support Preliminary Design in bidding stage.
Previous Saudi Aramco or Sabic project Experience is Preferable and shall be familiar with their specification / standards. Shall have exposure to ISO-9001 : 2015 Quality Management system and ASME U,U2,S & R Stamp certification Audit


THERMAL DESIGN ENGINEER


A degree in Mechanical Engineering or Diploma in Mechanical Engineering with experienced in mechanical design for at least Six (6) years in manufacturing sector.
Sound Knowledgeable in various designs and drawing software’s such as Pv Elite, HTRI and Thermal Design, AME tank, HTRI, Auto Cad.
Should have hands on experience in the design of process equipment’s like pressure vessels, heat exchangers etc., as per international codes like ASME, API, TEMA, BS etc.
responsible and Preparation / Review of mechanical design (either Manual or Software) package, detail engineering and drawings of equipment such as Pressure Vessel, Heat Exchanger, Fire Heater Columns, Tanks, Skids, Pipe Spooling (weld mapping), Structural, Stress Analysis, Heat Analysis and other Mechanical Construction as per the applicable international engineering codes and client’s specifications.
Review and checking of drawings and bill of materials.
To support Preliminary Design in bidding stage.
Previous Saudi Aramco or Sabic project Experience is Preferable and shall be familiar with their specification / standards.
Shall have exposure to ISO-9001 : 2015 Quality Management system and ASME U,U2,S & R Stamp certification Audit


Sr. Project Engineer


Qualification: Bachelor degree/Diploma


Experience: Should have minimum 5 to 10 years experience as a Sr Project Engineer


Foreman Blasting & Painting


Qualification: HSC, ITI/Diploma


Experience: Should have minimum 5 years experience as a Foreman Blasting& painting


Nationality: Indian


Email Id: rec12@asmacs.net, rec19@asmacs.net

Post a comment

  1. Sir, I am looking for a suitable position as a Senior foreman with 16 years of experience in various construction field (offshore & onshore) Projects.

    ReplyDelete

 
Top