Rays Power Infra is looking for a Civil Engineer and Electrical Engineer for our International project i.e., Bangladesh.


Civil Engineer


Roles and Responsibilities

  • Ensure to complete the Civil work within the stipulated timeline
  • Ensure to obtain WCC timely for Client billing
  • Certify JMR/WCC of Vendors.
  • Project site Team, Client & Contractor/Vendor management.
  • To provide the mandatory training to the Contractor and each worker with compulsory documentation. No staff and workers should work at the site without a training certificate.
  • Timely Handover.
  • Assessment of drawings/BOM & finalization as per site conditions and request for change if required.
  • Preparation of required raw Material and resources list after receiving approved designs and checking its availability with the contractor as well as in nearby market
  • Confer with contractor, engineers, In-charge, customers, and others to discuss day to day development and any further requirement for project completion
  • Identify raw material dumping areas for each block to fasten the execution work.
  • Reduction of wastage material.


Desired Candidate Profile

1- They have Good knowledge of Solar Project Execution

2- Good Knowledge of Design & Drawing Understanding

3- Candidate must possess solar experience


3+ years experience


Electrical Engineer


Roles and Responsibilities

  • Assessment of drawings/BOM & finalization as per site conditions and request for change if required.
  • • Execution of all Site activities as per SOP& FQP with proper HSE plan.
  • • Confer with contractor, engineers, In-charge, customers and others to discuss day to day development and any further requirement for project completion
  • • Investigate & close FOR & NCR rose by client.
  • • Fill all check list related to AC works.


2. Documentation and control:

  • Maintain record of all cable tests, Transformer test, HT panel test and other equipments
  • • Ensure Work completion certificate from client after completion of every activity
  • • Adherence of contract compliance: Customer to Rays and Rays to vendor.
  • • Compile data and write reports regarding ongoing and completed works of the project (Daily Basis)


3. Testing & Commissioning:

  • Maintaining testing equipment, tools and tackles at site for testing and pre-commissioning check
  • Ensure all cable tests, Transformer test, HT panel test and other equipments


4. Vendor Management

  • • Evaluate the vendor’s performance as per the assign work and take action with concern of site in-charge if vendor performance is not up to mark and insure the site work progress and time line will not be suffer due to vendor.
  • • Before start work on site take meeting with vendor prepare MOM and check availability of tool is satisfactory for work. Conduct weekly meeting with contractor and engineers to access achievement and problems.


Desired Candidate Profile

1- They have Good knowledge of Solar Project Execution

2- Good Knowledge of Design & Drawing Understanding

3- Candidate must possess solar experience.


Email: info@rayspowerinfra.com, kavita.chettri@rayspowerinfra.com

Post a Comment

 
Top